Optimasi Pengembangan Express Feeder pada Jaringan Distribusi untuk Mengurangi Drop Voltage Menggunakan Particle Swarm Optimization

Dendi Syaepul Alam; Nundang Busaeri; Muhammad Aris Risnandar

doi:10.52434/jft.v5i1.42659

Authors

Dendi Syaepul Alam Universitas Siliwangi
Nundang Busaeri Universitas Siliwangi
Muhammad Aris Risnandar Universitas Siliwangi

DOI:

https://doi.org/10.52434/jft.v5i1.42659

Keywords:

Backward Forward Sweep, Drop Voltage, Express Feeder, Particle Swarm Optimization

Abstract

Drop voltage is one of the main problems in the distribution system which has an impact on reducing the quality of voltage received by customers. This research aims to reduce voltage drop in the distribution system according to the standard voltage drop tolerance limit of 5% set in SPLN 72: 1987 on the CLDG extension by applying the Particle Swarm Optimization (PSO) optimization method in the development of express feeders. The CLDG feeder has a radial network topology with a channel length of 32.75 km with loads spread along the network. The simulation process was carried out to analyze the existing conditions and after optimization, using Backward Forward Sweep (BFS) power flow with the help of MATLAB R2023b software for its application and validated using ETAP 19.0.1. The results showed that PSO successfully determined the optimal location of express feeder development from bus B01 to bus B18, with the placement of a new LBS at bus B17. This development reduced the number of critical buses from 52 to 16 buses, and the maximum voltage drop from 9.86% to 6.67%.

References

[1] D. Agustian, “Pemeliharaan Jaringan Distribusi Saluran Udara Tegangan Menengah (SUTM) 20 kV dengan Metode Right of Way (ROW) di PT PLN (Persero) ULP Serang,” Jurnal Informatika dan Teknik Elektro Terapan, vol. 12, no. 3S1, Oct. 2024, doi: 10.23960/jitet.v12i3S1.5413.

[2] I. Affandy, I. Gd. D. Arjana, and C. G. I. Partha, “Pengaruh Rekonfigurasi Penyulang Terhadap Drop Tegangan Penyulang Penebel dan Penyulang Jatiluwih PT. PLN (Persero) ULP Tabanan,” Jurnal Sosial dan Teknologi (SOSTECH), pp. 724–734, Jun. 2021.

[3] F. N. Azizah, A. Andang, and Sutisna, “Perencanaan Kapasitas Transformator Distribusi Sesuai dengan Kebutuhan Daya Listrik di Kampus Mugarsari Universitas Siliwangi,” Universitas Siliwangi, 2024.

[4] H. M. Yudha, “Kualitas Daya Listrik dan Penanganannya,” Jurnal Desiminasi Teknologi, vol. 5, no. 1, 2017.

[5] PT. PLN (Persero), “SPLN 72:1987 Spesifikasi Desain untuk Jaringan Tegangan Menengah dan Tegangan Rendah,” Perusahaan Umum Listrik Negara, 1987.

[6] S. Satriani, M. T. Akhmad, H. Fauziah, and M. F. Ali, “Rekonfigurasi Jaringan Distribusi 20 kV untuk Mengurangi Drop Voltage Pada Penyulang Asuhan GI Daya,” Prosiding Seminar Nasional Teknik Elektro dan Informatika (SNTEI), pp. 36–44, 2023.

[7] N. Saputri, A. Asri, J. T. Elektro, P. Negeri, and U. Pandang, “Perancangan Pemasangan Express Feeder Untuk Perbaikan Profil Tegangan Pada Jaringan Distribusi 20 kV Penyulang Gardu Hubung Sungguminasa (GHSM) PT. PLN (Persero) ULP Sungguminasa,” Prosiding Seminar Nasional Teknik Elektro dan Informatika (SNTEI), pp. 376–380, 2022.

[8] A. Shafitri et al., “Dampak Pembangunan Express Feeder Jaringan Distribusi 20 KV untuk Mengatasi Drop Tegangan pada Feeder Retak Mudik PT PLN (Persero) ULP Mukomuko,” Jurnal Pustaka Nusantara Multidisplin, vol. 2, no. 3, 2024.

[9] D. Hardiantono and P. Mangera, “Comparison Using Express Feeder and Capacitor Bank Allocation to Corrective Voltage Level on Primary Distribution Feeder,” European Journal of Electrical Engineering, vol. 21, no. 4, pp. 355–359, 2019, doi: 10.18280/ejee.210402.

[10] M. Faridha and Dewiana, “Pemanfaatan Aplikasi Particle Swarm Optimization (PSO) untuk Pengaturan Pengurangan Beban Tenaga Listrik,” JTE UNIBA, vol. 8, no. 2, 2024.